| |
Civil & Environmental Engineer |
| |
-
CEE 1503 - INTRO TO ENVIRONMENTAL ENGRNG
Minimum Credits: 3
Maximum Credits: 3
Fundamentals of environmental science and engineering as applied to water and wastewater treatment, air quality control, and solid and hazardous waste management.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: CHEM 0102 or 0112 or 0120 or 0420 or 0720 or 0770 or 0970; PROG: Swanson School of Engineering
|
| |
-
CEE 1505 - WATER TREATMENT AND DISTRIBUTION SYSTEM DESIGN
Minimum Credits: 3
Maximum Credits: 3
Stepwise development and process design, equipment selection, economic evaluation, layout, and operating guidelines for water treatment, storage and distribution systems.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: (CEE 1503 and 1402) or CET 1141; PROG: School of Engineering
|
| |
-
CEE 1511 - ENVIRONMENTAL ENGINEERING PROCESS LABORATORY
Minimum Credits: 3
Maximum Credits: 3
Chemical and biological laboratory procedures and techniques for instrumental analysis applied to evaluation of liquids and gases for environmental assessment and operation and control of environmental quality control systems
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
Course Requirements: PREQ: CEE 1503; PROG: Swanson School of Engineering
|
| |
-
CEE 1513 - ENVIRONMENTAL ENGRNG PROCESSES
Minimum Credits: 3
Maximum Credits: 3
Introduction to basic design concepts applied to water and wastewater treatment, air quality control, and solid and hazardous waste management.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: CEE 1503 or CET 1141; PROG: Swanson School of Engineering
|
| |
-
CEE 1514 - ENVIRONMENTAL IMPACT ASSESSMENT
Minimum Credits: 3
Maximum Credits: 3
Technical and procedural aspects of environmental impact analysis and assessment with emphasis on regulatory framework, characterization of impacts and their remediation, and the decision process when applied to engineering systems.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: CEE 1503 or CET 1141; PROG: School of Engineering
|
| |
-
CEE 1515 - WASTEWATER COLLECTION AND TREATMENT PLANT DESIGN
Minimum Credits: 3
Maximum Credits: 3
Stepwise development and process design, equipment selection, economic evaluation, layout, and operating guidelines for wastewater collection and treatment systems.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: (CEE 1503 and 1402) or CET 1141; PROG: School of Engineering
|
| |
-
CEE 1520 - MATERIAL AND ENERGY BALANCES IN ENVIRONMENTAL ENGINEERING
Minimum Credits: 3
Maximum Credits: 3
Introduces students to engineering calculations involving material and energy balances around environmental and chemical processes.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
Course Requirements: PLAN: Civil & Environmental Engineering; PREQ: CEE 1503 and MATH 0240 and CHEM 0970
|
| |
-
CEE 1522 - FATE AND TRANSPORT IN ENVIRONMENTAL ENGINEERING
Minimum Credits: 3
Maximum Credits: 3
An introduction to the thermodynamic and kinetic drivers of chemical fate in the environment. Processes governing the diffusion, advection and transformation of chemicals in air, water and soil. Inter-media exchange, environmental degradation and uptake into biotic systems.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
Course Requirements: PREQ: CEE 1503; PROG: Swanson School of Engineering
|
| |
-
CEE 1523 - ENVIRONMENTAL ENGINEERING LAB
Minimum Credits: 3
Maximum Credits: 3
Chemical and biological laboratory procedures for environmental assessment and operation and control of environmental quality control systems.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: CEE 1503 or CET 1141; PROG: Swanson School of Engineering
|
| |
-
CEE 1533 - ENVRL ENGR DESIGN PROJECT
Minimum Credits: 3
Maximum Credits: 3
Group design of an engineered system for environmental quality control.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
Course Requirements: PREQ: CEE 1505 or 1507 or 1513 or 1515 or (CET 1141 and 1142); PROG: School of Engineering
|
| |
-
CEE 1609 - LIFE CYCLE ASSESSMENT METHODS AND TOOLS
Minimum Credits: 3
Maximum Credits: 3
This class will introduce students to life cycle thinking and provide engineers with tools to assess the sustainability and environmental impact of a product, process, or activity. Life cycle assessment (LCA) principles, methods, tools, and challenges will be explored throughout the course. Topics include material and energy flow analysis, environmental indicators and metrics for sustainability, case studies of LCA applications, and impact assessment.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
Course Requirements: PREQ: MATH 0140 or 0220 or 0221; PROG: Swanson School of Engineering
|
| |
-
CEE 1610 - ENGINEERING AND SUSTAINABLE DEVELOPMENT
Minimum Credits: 3
Maximum Credits: 3
This course is intended as an introductory interdisciplinary engineering course. Topics include principles of sustainable design in engineering, manufacturing, infrastructure, communications, and community development; overview of environmental issues for engineers; design for the environment; models of environmental processes; introduction to the use of life cycle assessment; and case studies examining the relationship of green design and the field of engineering.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
|
| |
-
CEE 1617 - GREEN BUILDING DESIGN AND ANALYSIS
Minimum Credits: 3
Maximum Credits: 3
Understanding the design and construction of green buildings are key elements in green and sustainable engineering. This course teaches all of the major aspects of green building design and construction, including sustainable sites, water efficiency, energy and atmosphere, materials and resources, indoor environmental quality, innovation, and design process. The united states green building council’s leadership in energy and environmental design green building rating system is used to demonstrate one possible green building rating system. Life cycle thinking will be discussed to expand the focus from not only design and construction, but also use, operations, and decommissioning.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
|
| |
-
CEE 1618 - DESIGN FOR THE ENVIRONMENT
Minimum Credits: 3
Maximum Credits: 3
Global population growth, resource scarcity, a changing climate, and an increasingly stressed water supply are significant environmental challenges we face today. The prominence of these challenges has led to increased awareness and demand for more sustainable approaches to engineering design and policy strategies. These topics will be discussed in design for the environment and will serve as motivation for the development of innovative design solutions to ‘real-world’ sustainability challenges. The course will begin with an introduction to sustainability, design frameworks, the design process and the role of innovation, followed by systems thinking, metrics to quantify and evaluate the sustainability of alternatives, and assessing toxicity and risk. The second half of the course will introduce students to designing appropriate technologies within the context of the developing world as well as a series of relevant case studies (e.g., energy, water, agriculture, nanotechnology). Design will be incorporated throughout the course as a way for students to apply what they learn in class to the development of an innovative solution to a sustainability challenge. The course integrates active learning components that provide students the opportunity to exercise the engineering design process, work effectively in a group, and practice written and oral presentation skills.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
Course Requirements: PROG: Swanson School of Engineering
|
| |
-
CEE 1700 - TRAFFIC MANAGEMENT AND OPERATIONS
Minimum Credits: 3
Maximum Credits: 3
Introduction to traffic flow theory and characteristics. Highway capacity analysis. Basic traffic management and control.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
Course Requirements: PROG: Swanson School of Engineering
|
| |
-
CEE 1703 - TRANSPORTATION ENGINEERING
Minimum Credits: 3
Maximum Credits: 3
Introduction to the design, planning, operation, management, and maintenance of transportation systems. Transportation planning inter-modal transportation systems (highway, air, rails, etc.). Transportation planning of highways, airports, and railroads with traffic flow models, capacity analysis, and safety. Concepts for designing facilities and systems area study with life cycle costing procedures and criteria for optimization.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: MATH 0240 or 0201 or 0241; PROG: Swanson School of Engineering
|
| |
-
CEE 1710 - TRANSPORTATION SYSTEMS ANALYSIS 1
Minimum Credits: 3
Maximum Credits: 3
A range of traffic control systems including the analysis and design of traffic signals are discussed along with traffic signal systems and freeway control systems. Other topics covered include data collection for traffic control systems, optimization software and models; traffic signal hardware design; high occupancy vehicle lanes and systems selection and design and implementation.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
Course Requirements: PROG: Swanson School of Engineering
|
| |
-
CEE 1711 - ITS OPERATIONS & DESIGN
Minimum Credits: 3
Maximum Credits: 3
This course serves as an introduction to the operation and design of intelligent transportation systems (ITS). The course begins by offering a review of traffic signal operations in isolation and in coordinated systems. Additional intelligent transportation design elements associated with detection, communication, and information dispersal will be introduced and discussed. Other traffic management applications such as route guidance, incident detection, emergency management, safety enhancement, tolling facilities, and rural its applications will also be introduced and discussed. Other fields of ITS such as commercial vehicle systems and fleet operations as well as intelligent vehicle development and system wide deployment will also be discussed. The course concludes with a discussion of the nation its architecture and standards as well as system deployment, planning, and evaluation.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
Course Requirements: PROG: Swanson School of Engineering
|
| |
-
CEE 1714 - PAVEMENT DESIGN AND ANALYSIS
Minimum Credits: 3
Maximum Credits: 3
Concepts and principles in the structural design of pavements for highways and airfields including: traffic loads, climatic factors, soil and material characterization. Application of current pavement design practices and procedures. Economic evaluation of highway and airport pavements.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: CEE 1105 and 1811; PROG: Swanson School of Engineering
|
| |
-
CEE 1715 - PAVEMENT MAINTENANCE AND REHAB
Minimum Credits: 3
Maximum Credits: 3
Engineering concepts and information needed to maintain and rehabilitate pavements. Project evaluation, testing and analysis. Design of rigid and flexible overlays, and other methods of rehabilitation. Selection of rehabilitation alternatives. Analysis of the effects of maintenance activities on pavement performance. Initial and life cycle cost analysis of various rehabilitation alternatives.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: CEE 1105 or CET 1151; PROG: Swanson School of Engineering
|
| |
-
CEE 1717 - COMPONENTS, PROPERTIES AND DESIGN OF PORTLAND CEMENT CONCRETE
Minimum Credits: 3
Maximum Credits: 3
Examines the influence of constituent materials (cements, aggregates and admixtures) on the properties of fresh and hardened concrete, mix design handling and placement of concrete; and behavior of concrete under various types of loading and environment; test methods, designing concrete mixes for specific applications.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
Course Requirements: PREQ: CEE 1105 or CET 1151; PROG: Swanson School of Engineering
|
| |
-
CEE 1718 - ADVANCED CONSTRUCTION AND BITUMINOUS MATERIALS
Minimum Credits: 3
Maximum Credits: 3
Advanced construction and bituminous materials soils, soil stabilization, aggregates, bituminous materials and mixtures. Advanced topics in selection and design of bituminous materials. Asphalt cement, rheology, emulsions, chip seals, hot-mix asphalt design, visco-elasticity characterization
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: CEE 1105 or CET 1151; PROG: School of Engineering
|
| |
-
CEE 1720 - URBAN TRANSPORTATION PLANNING
Minimum Credits: 3
Maximum Credits: 3
All aspects of the transportation planning process including transportation planning and decision making, transportation modeling, demand and supply analysis, transportation studies, environmental issues and project implementation.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: CEE 1703; PROG: Swanson School of Engineering
|
| |
-
CEE 1725 - PUBLIC TRANSPORTATION SYSTEMS
Minimum Credits: 3
Maximum Credits: 3
This course is designed to give seniors and graduate students a basic background in the planning, operations and development of public transportation systems within the context of the overall transportation system.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
Course Requirements: PREQ: CEE 1703; PROG: Swanson School of Engineering
|
| |
-
CEE 1730 - HIGHWAY ENGINEERING
Minimum Credits: 3
Maximum Credits: 3
Highway administration, classification, planning and programming. Geometric design of highways. Traffic characteristics and capacity analyses. Traffic operations and control. Highway design project.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: CEE 1703; PROG: Swanson School of Engineering
|
| |
-
CEE 1733 - TRANSPORTATION DESIGN PROJECT
Minimum Credits: 3
Maximum Credits: 3
Consists of comprehensive projects with emphasis on the nature of engineering problem solving and the creative aspects of design.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: CEE 2700; PROG: Swanson School of Engineering
|
| |
-
CEE 1750 - PROJECT DEVELOPMENT AND IMPLEMENTATION
Minimum Credits: 3
Maximum Credits: 3
Project development and implementation - 3 credits: this course provides overview of the process used in project programming and planning, design, construction and operation. The course will emphasize the process used for implementation of major projects with emphasis on construction management and how that task interfaces with other aspects of project development. Students will be involved in a team effort to conceptualize the project, plan alternatives, determine the environmental impact, examine design alternatives, prepare the project for construction documents, recommend award of the contract, manage the contract during construction and determine operational needs of the project.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
Course Requirements: PREQ: CEE 1703; PROG: Swanson School of Engineering
|
| |
-
CEE 1800 - ENGINEERING GEOLOGY
Minimum Credits: 3
Maximum Credits: 3
Review of basic geologic principles with emphasis on the importance and influence of geology and geologic processes on engineering projects such as dam sites, foundations, tunnels, mine subsidence, landslides, highways, groundwater problems, and seismic studies.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
Course Requirements: PROG: Swanson School of Engineering
|
| |
-
CEE 1809 - HYDRAULIC FRACTURING MECHANICS
Minimum Credits: 3
Maximum Credits: 3
This class will prepare students to wisely and critically design hydraulic fracturing treatments as well as make informed recommendations to employers, governments, and communities about the risks and benefits of hydraulic fracturing methods. Upon completion of this course, students will be equipped to use engineering formulae to estimate hydraulic fracture dimensions, evaluate strengths and weaknesses of various modeling approaches, characterize subsurface conditions from wellbore pressure analysis, make sound recommendations for monitoring, and compare and contrast approaches and risks for a range of application domains.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
Course Requirements: PREQ: CEE 1330 and 1402; PROG: Swanson School of Engineering
|
| |
-
CEE 1811 - PRINCIPLES OF SOIL MECHANICS
Minimum Credits: 3
Maximum Credits: 3
Basic soil properties, permeability, capillarity and frost action, compaction, stresses in soil masses, two-dimensional seepage, compressibility, stress-strain-time behavior, and shear strength.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: ENGR 0141 or 0145 or ET 0053; PROG: Swanson School of Engineering
|
| |
-
CEE 1821 - FOUNDATION ENGINEERING
Minimum Credits: 3
Maximum Credits: 3
Application of the principles of soil mechanics to the analysis and design of foundations, the stability of slopes and retaining structures.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: (CEE 1811 or CET 1131) and CEE 1330; PROG: School of Engineering
|
| |
-
CEE 1833 - GEOTECHNICAL DESIGN PROJECT
Minimum Credits: 3
Maximum Credits: 3
Consists of comprehensive projects with emphasis on the nature of engineering problem solving and the creative aspects of design.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
Course Requirements: PREQ: CEE 1714 or 1715 or 1821 or 2814 or CET 1124 or 1131; PROG: Swanson School of Engineering
|
| |
-
CEE 1996 - SPECIAL PROJECTS
Minimum Credits: 1
Maximum Credits: 4
Academic Career: Undergraduate
Course Component: Directed Studies
Grade Component: Letter Grade
|
| |
-
CEE 2201 - CONSTRUCTION COST ENGINEERING
Minimum Credits: 3
Maximum Credits: 3
This course teaches the methodology for estimating construction costs. The course covers all types of costs and all types of construction. The student is introduced to standard reference materials and to computerized estimating systems. The course teaches methods and procedures for developing accurate estimates and the basis for follow-on cost control.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2202 - CONSTRUCTION SCHEDULING
Minimum Credits: 3
Maximum Credits: 3
This course teaches the student the theory and practice of planning, scheduling, and controlling the time and cost of construction projects. The course covers various advanced techniques such as cost duration analysis, critical resource analysis, stochastic modeling, and cost control. The course teaches the use of contemporary computerized software systems with hands-on application.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2203 - CONSTRCT METHODS AND EQUIPMENT
Minimum Credits: 3
Maximum Credits: 3
This course teaches the student how to plan, organize, and execute construction operations. The course includes typical operations in both building construction and engineering construction. The course describes how to properly construct in order to achieve quality and productivity objectives.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2204 - CONSTRUCTION LAW AND RISK MGMNT
Minimum Credits: 3
Maximum Credits: 3
This course introduces the student to the legal and risk management issues in construction. The course covers the principles of contract law and various legal areas affecting construction such as environmental regulations, insurance, bonds, tort liability, dispute resolution, and professional services.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2205 - CONSTRCT FINANCE & COST CONTROL
Minimum Credits: 3
Maximum Credits: 3
This course introduces the student to the company level financial and accounting systems which are used in the construction industry, and to project control systems which are used to manage cost and time. The course includes such topics as financial accounting, cost accounting, financial statements, and variance analysis.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2206 - CONSTRCT & COST OF ELEC SUPPLY
Minimum Credits: 3
Maximum Credits: 3
This course teaches basic construction and cost estimating methodologies for single and three-phase electrical distribution systems that include wiring, power, and controls. The course uses commercial estimating systems and the national electrical code.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2207 - CONSTRCT & COST OF MECHL SYSTEMS
Minimum Credits: 3
Maximum Credits: 3
This course teaches the student how to plan, organize, and execute mechanical construction operations; and the methodologies for estimating their costs. The course covers mechanical systems such as water (supply and waste), HVAC, fire protection, and their controls.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad Letter Grade
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2230 - BUILDING INFORMATION MODELING
Minimum Credits: 3
Maximum Credits: 3
The goal of this course is to introduce the students to building information modeling (BIM) and other new and evolving technologies which are revolutionizing the building and horizontal infrastructure construction industry. Students will learn how BIM and other innovative technologies are being adopted currently by progressive builders to streamline the construction process through enhanced coordination, visualization, logistical planning, cost estimation and analysis. They will also learn how these new tools are enabling (and in some instances requiring) new highly integrated processes that are redefining architecture, engineering, construction and operations (AECO) business relationships and delivery contracts.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad Letter Grade
Course Requirements: PROG: Swanson School of Engineering
|
| |
-
CEE 2320 - ADVANCED MECHANICS OF MATERIALS
Minimum Credits: 3
Maximum Credits: 3
The fundamentals of elasticity are introduced and related to various problems such as beams and bars on elastic foundations, unsymmetrical bending, torsion of thin walled members, curved bars, failure theories, and stability.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2330 - ADVANCED STRUCTURAL ANALYSIS
Minimum Credits: 3
Maximum Credits: 3
Theory and application of matrix stiffness and flexibility methods for analysis of framed structures. Computer implementation for the solution of two- and three-dimensional frames, trusses, and grid systems.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2333 - INTRODUCTION TO FINITE ELEMENTS
Minimum Credits: 3
Maximum Credits: 3
Introduction to the finite element method and its application to various problems of elastic elements and structures. Both physical and variational approaches are used.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Swanson School of Engineering
|
| |
-
CEE 2340 - CONCRETE STRUCTURES 2
Minimum Credits: 3
Maximum Credits: 3
Advanced behavior, strength and design of reinforced concrete structures, including column and frame stability effects, two-way slabs, and serviceability criteria. Introduction to earthquake design concepts.
Academic Career: GRAD
Course Component: Lecture
Grade Component: Grad LG/SNC
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2341 - STEEL STRUCTURES 2
Minimum Credits: 3
Maximum Credits: 3
Advanced design criteria for steel structures, including composite beams, columns, and frames; member and system stability; first- and second- order analysis of frames; and serviceability criteria.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2343 - PRESTRESSED CONCRETE
Minimum Credits: 3
Maximum Credits: 3
Design of prestressed concrete beams and slabs, including shear and torsion effects.
Academic Career: GRAD
Course Component: Lecture
Grade Component: Grad LG/SNC
Course Requirements: PROG: Graduate Engineering Students
|
| |
-
CEE 2346 - REPAIR AND RETROFIT OF STRUCTURES
Minimum Credits: 3
Maximum Credits: 3
Introduction and use of performance-based design concepts. Analysis and modeling techniques for existing and repaired structures. Gravity and lateral load retrofit procedures. Selection, modeling and design of repair and/or retrofit measures for a variety of structures and building materials. Retrofit for blast loads.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Swanson School of Engineering
|
| |
-
CEE 2347 - BRIDGE ENGINEERING
Minimum Credits: 3
Maximum Credits: 3
Introduce concepts of bridge engineering by providing the students with the necessary knowledge and skills to apply the AASHTO lRFD specifications for the analysis and design of highway bridge superstructure components.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Swanson School of Engineering
|
| |
-
CEE 2360 - DYNAMICS OF STRUCTURES
Minimum Credits: 3
Maximum Credits: 3
Fundamentals of free and forced vibration of one and multi degree of freedom structures, including damping. Matrix formulation of multi-degree of freedom structures. Analytical and numerical methods for determining response; deflection and stress evaluation including damping effects.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Swanson School of Engineering
|
| |
-
CEE 2401 - OPEN CHANNEL HYDRAULICS
Minimum Credits: 3
Maximum Credits: 3
Basic theories and principles of open channel flows (including flows in rivers and streams). Methods of calculating uniform flow, gradually varied flow, rapidly varied flow, and unsteady flow. Design of open channels.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate Engineering Students
|
| |
-
CEE 2500 - ENVRNMNTL ENGRG MICROBIOL
Minimum Credits: 3
Maximum Credits: 3
Biological fundamentals as applied to the description and evaluation of natural environments and environmental quality control systems.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2501 - ENVIRONMENTAL ENGINEERING CHEMISTRY
Minimum Credits: 3
Maximum Credits: 3
Chemical fundamentals as applied to the description and evaluation of natural environments and environmental quality control systems.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2502 - PHYSICAL-CHEMICAL PRINCIPLES IN ENVIRONMENTAL ENGINEERING
Minimum Credits: 3
Maximum Credits: 3
Basic principles and applications of thermodynamics, reaction kinetics, equilibria, diffusion, and mass transfer.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2507 - INDUSTRIAL WASTE MANAGEMENT
Minimum Credits: 3
Maximum Credits: 3
Problems and approaches to industrial waste treatment and disposal, pollution prevention and sustainability, waste minimization, process selection, control, and resource recovery.
Academic Career: GRAD
Course Component: Lecture
Grade Component: Grad Letter Grade
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2513 - ENVIRONMENTAL IMPACT ASSESSMNT
Minimum Credits: 3
Maximum Credits: 3
Technical and procedural aspects of environmental impact analysis and assessment with emphasis on regulatory framework, characterization of impacts and their remediation, and the decision process when applied to engineering systems.
Academic Career: GRAD
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2609 - LIFE CYCLE ASSESSMENT METHODS AND TOOLS
Minimum Credits: 3
Maximum Credits: 3
Life cycle assessment (LCA) is a tool for evaluating the environmental impacts of a product or process by documenting energy and material flows from inception to ultimate disposal. This course teaches framework, methods, and tools that can be applied to decision making in the design, construction, operation, and maintenance of the built environment. Topics include the principles of life cycle assessment, case studies of applications of life cycle assessment, methods for life cycle inventory, and methods for life cycle impact assessment. The course aims to encourage systems thinking and to facilitate life cycle applications to graduate students’ individual research topics. Students can expect to develop a project and paper applying LCA to their research topic. In most cases, students will produce a publishable journal article at the end of the semester.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad Letter Grade
|
| |
-
CEE 2717 - COMPONENTS, PROPERTIES AND DESIGN OF PORTLAND CEMENT CONCRETE
Minimum Credits: 3
Maximum Credits: 3
Examines the influence of constituent materials (cements, aggregates and admixtures) on the properties of fresh and hardened concrete, mix design handling and placement of concrete; and behavior of concrete under various types of loading and environment; test methods, designing concrete mixes for specific applications.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad Letter Grade
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2801 - ADVANCED SOIL MECHANICS
Minimum Credits: 3
Maximum Credits: 3
Mathematical and graphical operations on stress and strain, seepage analysis and flow net, consolidation theory, upper and lower bound analysis, earth pressure theory, bearing capacity, and plasticity based soil models.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2802 - GEOTECHNICAL ANALYSIS
Minimum Credits: 3
Maximum Credits: 3
Fundamentals of the analytical and numerical methods in geotechnical engineering are explored. Emphasis will be placed upon implementation and verification of various formulations into basic programs. Seepage, stress distribution, settlement, consolidation, sheet piling wall, and beams on elastic foundations are some of the topics covered.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2814 - SLOPES & EARTH RETAINING STRUCT
Minimum Credits: 3
Maximum Credits: 3
Conventional methods and recent advances in slope stability analyses; classical and modern earth pressure theories; design of rigid and flexible retaining structures; earth dams, their design and stability.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PROG: Graduate School of Engineering
|
| |
-
CEE 2818 - ADVANCED FOUNDATION ENGINEERING
Minimum Credits: 3
Maximum Credits: 3
Subsurface exploration and control of groundwater; current procedures for the analysis, design, and construction of waterfront structures and shallow and deep foundations.
Academic Career: Graduate
Course Component: Lecture
Grade Component: Grad LG/SNC Basis
Course Requirements: PREQ: CEE 2801; PROG: Swanson School of Engineering
|
Classics |
| |
-
CLASS 0010 - GREEK CIVILIZATION
Minimum Credits: 3
Maximum Credits: 3
A general introduction to the culture and society of Ancient Greece, with emphasis on the Archaic Period and the fifth and fourth centuries B.C.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 0020 - ROMAN CIVILIZATION
Minimum Credits: 3
Maximum Credits: 3
A general introduction to the culture and society of the Roman world, with emphasis on the period of the republic and the early empire.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 0030 - MYTHOLOGY IN THE ANCIENT WORLD
Minimum Credits: 3
Maximum Credits: 3
This course examines in cultural context the traditional stories—myth, legend, and folktale—of the ancient Greeks and Romans. Theories drawn from various disciplines are critically evaluated. Attention to connections with ritual practice and to expression in daily life, art, architecture, etc.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 0032 - ATHLETICS OF THE ANCIENT WORLD
Minimum Credits: 3
Maximum Credits: 3
This course examines athletic competition, popular games, gladiatorial and other exhibitions of the ancient Greeks and Romans. Much emphasis on the social/cultural context and underlying values. Attention to relevant artistic archaeological, and historical settings.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
|
| |
-
CLASS 0034 - WOMEN AND MEN IN ANCIENT MEDITERRANEAN
Minimum Credits: 3
Maximum Credits: 3
An examination of ancient Mediterranean society, particularly that of Greece and Rome, from the perspective of male and female gender roles.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 0035 - WOMEN AND MEN ANCIENT MEDITERRANEAN/WRITING PRACTICUM
Minimum Credits: 1
Maximum Credits: 1
Writing practicum for students taking class 0034 as a writing course.
Academic Career: Undergraduate
Course Component: Credit Laboratory
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 0037 - MYTH IN ANCIENT WORLD/WRITING PRACTICUM
Minimum Credits: 1
Maximum Credits: 1
Writing practicum for students taking class 0030 as a writing course.
Academic Career: Undergraduate
Course Component: Credit Laboratory
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 0100 - MASTERPIECES GREEK AND ROMAN LITERATURE
Minimum Credits: 3
Maximum Credits: 3
An introduction to the critical analysis of literary works through the medium of selected masterpieces of Greek and Roman literature in English translation.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 0300 - HISTORY OF ANCIENT PHILOSOPHY
Minimum Credits: 3
Maximum Credits: 3
The aim of this course is to introduce students to some of the main achievements and leading ideas of Greek philosophy up to classical times. Emphasis will be on understanding and evaluating the arguments and ideas of the Greek philosophical tradition.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 0302 - HISTORY ANCIENT PHILOSOPHY/WRITING PRACTICUM
Minimum Credits: 4
Maximum Credits: 4
The aim of this course is to introduce students to some of the main achievements and leading ideas of Greek philosophy up to classical times. Emphasis will be on understanding and evaluating the arguments and ideas of the Greek philosophical tradition. Special writing component for CLASS 0300, “History of Ancient Philosophy”.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 0330 - MYTH AND SCIENCE
Minimum Credits: 3
Maximum Credits: 3
The Greeks in the sixth to fourth century B.C. Initiated forms of thinking we have from then on called “scientific” and “philosophical”. This course examines the question of how science is distinguished from “non-science” by studying the role of myth and science in ancient Greece. The aim is to understand what distinguishes the ideas of the first scientists and philosophers from those earlier beliefs called myth.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 0400 - ANCIENT EMPIRES
Minimum Credits: 3
Maximum Credits: 3
Empires dominate and control resources over broad geographical areas, establishing systems (administrative, religious, and intellectual) to perpetuate and justify that control. The course will survey the archaeological remains of the principal empires of the ancient near East and Mediterranean, emphasizing both the modes of control and the themes or messages used to justify it.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 0500 - ANCIENT ART
Minimum Credits: 3
Maximum Credits: 3
The Mediterranean Sea is a lake and its shores have produced many important cultures and artistic traditions. The course will survey the artistic traditions of Turkey and the near east, Egypt, Greece and Rome. Special attention will be paid to (1) the relationship between the artistic traditions of individual areas and the societies which produced them, and (2) the way in which influences from one culture were transformed by another.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 0600 - INTRODUCTION TO MEDITERRANEAN ARCHAEOLOGY
Minimum Credits: 3
Maximum Credits: 3
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
|
| |
-
CLASS 0618 - DEATH IN THE ANCIENT WORLD
Minimum Credits: 3
Maximum Credits: 3
The death of a loved one is an emotional and powerful occurrence that provokes a variety of human responses. In addition to writings describing their funerary practices, the civilizations of the ancient Mediterranean region have left artistic representations of death and dying, built tombs, and objects associated with funerary rituals. The study of these texts, images, structures, and objects allows us to better understand ancient attitudes and reactions to death. This undergraduate lecture focuses on the visual and material evidence of funerary practices and beliefs in ancient Egyptian, Greek, and Roman societies. The subject will be approached thematically. First, we will explore how archaeologists discover death-related artifacts and how scholars approach the study and reconstruction of ancient death rituals. Ancient practices and beliefs regarding the mummification, the funeral, commemorative strategies, visits to the grave, and the afterlife will be explored, and images found on specific media (vases, sculpture, built tombs, paintings) will be discussed in depth. The course will conclude with discussions of the roles that sensational topics, like fear of the undead (zombies, vampires, and ghosts) and spectacles of death (gladiatorial contests and public executions), played in ancient Mediterranean civilizations.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 0650 - ARCHAEOLOGY OF THE BODY
Minimum Credits: 3
Maximum Credits: 3
This interdisciplinary undergraduate course explores the archaeological evidence of the human body in various Mediterranean civilizations.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 1022 - THE AUGUSTAN AGE
Minimum Credits: 3
Maximum Credits: 3
A survey of the political, intellectual, literary, and artistic achievements of Rome in the time of Augustus.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: CLASS 0020 or CLASS 1220
|
| |
-
CLASS 1050 - COMPUTER METHODS IN THE HUMANITIES
Minimum Credits: 3
Maximum Credits: 3
This course introduces students to the use of computational modeling and programming to conduct the text-based research in the humanities. Course goals include 1) learning how to identify research questions in the humanities that are amenable to computational systems to explore those questions. No prior programming experience or knowledge of foreign languages required.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
|
| |
-
CLASS 1060 - GREEK AND LATIN ELEMENTS IN ENGLISH
Minimum Credits: 3
Maximum Credits: 3
This course focuses on the semantic elements which have come into English from the classical languages, Greek and Latin. In addition, it provides a general introduction to the history of English and its relationship to other Indo-European languages.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
|
| |
-
CLASS 1090 - TOPICS IN CLASSICAL CULTURE
Minimum Credits: 3
Maximum Credits: 3
Study of selected topics in Greco-Roman culture.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
|
| |
-
CLASS 1130 - CLASSICAL MYTHOLOGY AND LITERATURE
Minimum Credits: 3
Maximum Credits: 3
This course examines how authors of classical antiquity used the traditional figures and stories of their culture’s mythology as material for works of literature.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 1140 - GREEK TRAGEDY
Minimum Credits: 3
Maximum Credits: 3
Study of representative plays by the three great tragic dramatists of ancient Greece; Aeschylus, Sophocles, and Euripides. All readings are in English translation.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 1142 - ANCIENT EPIC
Minimum Credits: 3
Maximum Credits: 3
Study of selected Greek and Roman epics in English translation. Among the works that may be read are Homer’s Iliad and Odyssey, Apollonius’ Argonautica, Virgil’s Aeneid, and Ovid’s metamorphoses.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 1144 - GREEK AND ROMAN LYRIC POETRY
Minimum Credits: 3
Maximum Credits: 3
Study of selected poems and fragments of the Greek and Roman lyric poets in English translation. Among the poets that may be read are Archilochus, Sappho, Pindar, Catullus, and Horace.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 1146 - GREEK AND ROMAN HISTORIANS
Minimum Credits: 3
Maximum Credits: 3
Study of selected works by Greek and Roman historians in English translation. Among the authors that may be read are Herodotus, Thucydides, Polybius, Sallust, levy, and Tacitus.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 1151 - DEATH IN THE MEDITERRANEAN WORLD
Minimum Credits: 3
Maximum Credits: 3
In many cultures, people sometimes ask fundamental questions about their existence, including, “what happens after we die?” This course will focus on the evolution of beliefs and rituals related to death and the afterlife in and around the ancient Mediterranean basin, including egyptian, greek, etruscan, and roman cultures. Using an interdisciplinary approach, we will combine methodologies from anthropology, classics, history, and religious studies. Topics to be covered include myths of the afterlife, books of the dead, magic and death rituals, funeral practices and paraphernalia (disposal of the dead), cults of the dead, divinization, heaven and hell, judgment, and the impact of christianization on the ancient understanding of death.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
|
| |
-
CLASS 1164 - GREEK TRAGEDIES AND MODERN RESPONSES
Minimum Credits: 3
Maximum Credits: 3
Academic Career: Undergraduate
Course Component: Seminar
Grade Component: Letter Grade
|
| |
-
CLASS 1210 - GREEK HISTORY
Minimum Credits: 3
Maximum Credits: 3
A survey of the history of ancient Greece, with special emphasis on political and social developments during the fifth century B.C.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 1220 - ROMAN HISTORY
Minimum Credits: 3
Maximum Credits: 3
A survey of the history of Rome from the earliest times through the late empire, with particular emphasis on political and social developments during the late republic and early empire.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 1231 - EMERG GRECO-ROMAN/WRIT PRAC
Minimum Credits: 1
Maximum Credits: 1
Writing practicum for students taking class 1230 as a writing course.
Academic Career: Undergraduate
Course Component: Credit Laboratory
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 1250 - LAW & SOCIETY IN GREECE & ROME
Minimum Credits: 3
Maximum Credits: 3
This advanced undergraduate course examines the legal systems of ancient Greece and Rome with particular attention to interrelations with contemporary society.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 1290 - TOPICS IN ANCIENT HISTORY
Minimum Credits: 3
Maximum Credits: 3
Study of selected topics in Greek and Roman history. All readings are in English translation.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: CLASS 0020 or CLASS 1220 or HIST 1781
|
| |
-
CLASS 1312 - PLATO
Minimum Credits: 3
Maximum Credits: 3
This is an advanced undergraduate course examining Plato’s main views both in their historical context, and as they influence our own thinking today; the relations between Socrates and the sophists are also studied.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
Course Requirements: PREQ: CLASS 0300 or PHIL 0200
|
| |
-
CLASS 1314 - ARISTOTLE
Minimum Credits: 3
Maximum Credits: 3
This course will examine the basic concepts of Aristotle’s metaphysics, physics, ethics, and logic.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 1316 - HELLENISTIC PHILOSOPHY
Minimum Credits: 3
Maximum Credits: 3
An examination, at the advanced undergraduate level, of the three major schools of the Hellenistic age - the stoics, epicureans, and skeptics - and their views about ethics, epistemology, and the nature of reality.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 1370 - MEDIEVAL PHILOSOPHY
Minimum Credits: 3
Maximum Credits: 3
This advanced undergraduate course examines selected major figures in European philosophy during the middle ages.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 1390 - TOPICS IN ANCIENT PHILOSOPHY
Minimum Credits: 3
Maximum Credits: 3
Study of selected topics in ancient philosophy. All readings are in English translation.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: LG/SNC Elective Basis
|
| |
-
CLASS 1402 - GRECO-ROMAN RELIGIONS
Minimum Credits: 3
Maximum Credits: 3
This course introduces students to religious texts and traditions in a formative era of Western civilization and culture. Our focus will be on the variety of religious expression in Greco-Roman culture, which flourished in the geographical area of the Mediterranean basin during the first five centuries of the common era. By considering such topics as debates about the nature of the gods and access to them (through oracles, ritual and magic), the emergence of the idea of the holy person, and a variety of religious traditions as expressed in prayer, ritual and art, students will encounter a rich religious imagination that is truly different from contemporary understandings of religion and yet strangely familiar as well. We will also explore the complete integration between religion politics in the ancient world.
Academic Career: Undergraduate
Course Component: Lecture
Grade Component: Letter Grade
|
| |
Page: 1 <- Back 10 … 7
| 8
| 9
| 10
| 11
| 12
| 13
| 14
| 15
| 16
| 17
… Forward 10 -> 54 |
